VHF AND UHF DIGITAL REPEATERS

IC-FR5300
IC-FR6300

NXDN Version

Two Channels in One Box Repeater, Compatible with Affordable Digital Simulcast

One Platform for All Your System Configurations
The FR5300 is a second generation IDAS™ repeater that builds upon the powerful product line with the affordable, low complexity digital simulcast capabilities and a new CPU/FPGA platform. Increase coverage with simulcast by adding repeaters to pair on the same networks.

VHF IDAS DIGITAL

IC-FR5300

UHF IDAS DIGITAL

IC-FR6300

ZOOM

Open

Completely New CPU/FPGA Platform

The IC-FR5300 series is the second generation IDAS™ Repeater, keeping system compatibility with the original IC-FR5000 series and continuing its unique package. It looks the same as the IC-FR5000, but a new CPU/FPGA platform is used. The IC-FR5300 series provides digital simulcast system capability and ±0.1 ppm high frequency stability with a 1 pps reference signal from the GNSS antenna.

System Scalability

The IC-FR5300 series can be easily upgraded by installing an optional UC-FR5300 Network/controller board and software provided with a CF card. Depending on the communication density and coverage, your radio system can grow from a single site to a simulcast system or multi-site trunking* system, to match your communication needs.
* Compatible IDAS radio terminals are required for multi-site trunking.

System	Optional Network/Controller Board
Simulcast Conventional	UC-FR5300 #14 (Supplied with a CF-FR5300SC) and UX-241 GNSS antenna
Multi-site Conventional	UC-FR5300 #12 (Supplied with a CF-FR5000MC)
Single site Trunking	UC-FR5300 #11
Multi-site Trunking	UC-FR5300 #13 (Supplied with a CF-FR5000MT)

D-SUB 25-Pin Accessory Connector

The IC-FR5300 series has a programmable D-SUB 25-pin accessory connector for connecting an external remote control devices. Also, modulation/demodulation signals can be input/output from the D-SUB connector.

50W Output at 50% Duty Cycle or 25W 100% Duty Cycle Operation*

Employing a high performance power amplifier, the IC-FR5300 series provides a reliable 100% duty cycle operation at 25W output. When operated at the high power setting of 50W, the repeater operates with a 50% duty cycle.

* 25 W output power depending on the repeater version. Ambient temperature: 25°CAmbient temperature: 25°C

50W Output at 100% Duty Cycle or 100W 50% Duty Cycle Operation with Optional Power Amplifier*

When need higher power, the optional UR-PA5000/UR-PA6000 series power amplifier provides 100W output power with a 50% duty cycle and 50W output with 100% duty cycle.

* Ambient temperature: 25°C

Capable of Installing Two RF modules in One Chassis

The IC-FR5300 series has an internal space for installing another RF unit. Two RF modules* can be installed and operated independently. LEDs on the front panel shows the status of both channel.

* Optional UR-FR5300/UR-FR6300 required.

Digital/Analog Mixed Mode and Multiple Tone-Group Using CTCSS, DTCS Tone and RAN

The IC-FR5300 series can receive both analong and digital modes on a channel, and transmit either mode, depending on the programming. It decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code.

32 Channel Capacity and 5 Programmable Buttons

The 12-digit alphanumeric display, 5 programmable buttons, 32 memory channels and internal speaker enable you to use the repeater as a simple base station, or to check repeater activity. The LCD shows a variety of text and code information.

IP Remote Maintenance

When the IC-FR5300 series is connected to an IP network through the optional UC-FR5300 network/controller board, PC programming and IP address setting can be made from a remote location. The SNMP traps and Syslog can be sent to your manager for remote monitoring.

Other Features

19-inch rack mount 2U height low profile
Receiver voting function improves talkback capability of radio terminals in the field
RC-FS10 remote communicator software works as a simple dispatch station to communicate with radio terminals through the repeater
CW ID transmitter
PTT priority setting (Local Microphone, external PTT or repeater operation)
5-Tone decoder* (* For analog mode only)
DTMF encoder/decoder
Low voltage alert

Rear Panel View

General

			IC-FR5300	IC-FR6300
Frequency coverage (Varies according to version)			136-174 MHz (USA, EXP, EUR, CAN, AUS)	400-470 MHz (USA, EXP, EUR, CAN) 450-512 MHz (USA) 450-520 MHz (EXP, AUS) 330-400 MHz (EXP)
Number of channels			32 channels / 1 zone
Channel spacing (Varies according to version)			6.25/12.5/25 or 7.5/15/30 kHz
Type of emission			16K0F3E*¹ (25 kHz), 14K0F3E (20 kHz, EUR), 11K0F3E (12.5/15 kHz, USA), 8K50F3E (12.5 kHz), 4K00F1E/F1D (6.25/7.5 kHz)
Power supply requirement			13.6 V DC (USA, CAN, EXP) 13.2 V DC (EUR, AUS)
Current drain (at 13.6V DC)	Tx High		15.0 A maximum (at 50 W) 8.0 A maximum (at 25 W)
	Rx	Stand-by	500 mA (FAN OFF)
	Rx	Max. audio	1900 mA
Dimensions (projections not included; W×H×D)		IC-FR5300/IC-FR6300	483 × 88 × 260 mm, 19.0 × 3.5 × 10.2 in
Dimensions (projections not included; W×H×D)		UR-FR5300/UR-FR6300	176×60×194 mm, 6.9 × 2.4 × 7.6 in
Weight (approx.)		IC-FR5300/IC-FR6300	5.78 kg, 12.7 lb
Weight (approx.)		UR-FR5300/UR-FR6300	2.1 kg, 4.6 lb
Operating temperature range			-30℃ to +60℃, –22 °F to +140 °F (USA, CAN, EXP) -25 ℃ to +55 ℃, –13 °F to +131 °F (EUR, AUS)

*^₁ 25 kHz bandwidth is not available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25 kHz bandwidth.

Transmitter

	IC-FR5300	IC-FR6300
RF output power (Hi, L2, L1) (Varies according to version)	50 W, 25 W, 5 W (USA, EXP, CAN, AUS Versions) 25 W, 10 W, 5.8 W (EUR, EXP Versions)
Spurious emissions	80 dB typ. (TIA-603) 0.25 μW (≤ 1 GHz), 1.00 μW (> 1 GHz) (EN301 166, EN300 086)
Frequency stability	±1.0 ppm or less ±0.1 ppm or less (corrected using GNSS)
Audio harmonic distortion	0.9% typ. (AF 1kHz 40% deviation)(TIA-603) 1.1% typ. (AF 1kHz 40% deviation)(EN 300 086)	0.8% typ. (AF 1kHz 40% deviation)(TIA-603) 0.8% typ. (AF 1kHz 40% deviation)(EN 300 086)
FM Hum and Noise	83 dB typ. (W) 77 dB typ. (N)	72 dB typ. (W) 67 dB typ. (N)

Receiver

		IC-FR5300	IC-FR6300
Sensitivity	Digital (1% BER)	–4.0 dBμV (0.32 μV) emf typ. (EN301 166)	–3.5 dBμV (0.33 μV) emf typ. (EN301 166)
	Analog (12 dB SINAD)	–119 dBm (0.25 μV) typ. (TIA-603)	–117 dBm (0.32 μV) typ. (TIA-603)
	Analog (20 dB SINAD)	–4.0/–4.0/–1.0 dBμV emf typ. (W/M/N)(EN300 086)	–3.0/–3.0/0.0 dBμV emf typ. (W/M/N)(EN300 086)
Adjacent channel selectivity	Digital	66 dB typ. (EN301 166)	63 dB typ. (EN301 166)
Adjacent channel selectivity	Analog	85/80 dB typ. (W/N)(TIA-603) 84/83/78 dB typ. (W/M/N)(EN300 086)	80/56 dB typ. (W/N)(TIA-603) 78/78/74 dB typ. (W/M/N)(EN300 086)
Spurious response rejection	Digital	87 dBμV emf typ. (EN301 166)	85 dBμV emf typ. (EN301 166)
Spurious response rejection	Analog	85 dB typ.(TIA-603) 81 dB typ. (EN300 086)	84 dB typ.(TIA-603) 81 dB typ. (EN300 086)
Intermodulation rejection	Digital	78 dBμV emf typ. (EN301 166)	78 dBμV emf typ. (EN301 166)
Intermodulation rejection	Analog	81/81 dB typ. (W/N)(TIA-603) 75/74/73 dB typ. (W/M/N)(EN300 086)	80/80 dB typ. (W/N)(TIA-603) 74/74/73 dB typ. (W/M/N)(EN300 086)
AF output power		3.9 W typ. (at 5% distortion with a 4Ω load)

Measurements made in accordance with TIA-603, EN300 086 and EN301 166.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard	MIL-810 G
Standard	Method	Procedure
Low Pressure Storage	500.5	I
Low Pressure Operation	500.5	II
High Temperature Storage	501.5	I
High Temperature Operation	501.5	II
Low Temperature Storage	502.5	I
Low Temperature Operation	502.5	II
Temperature Shock	503.5	I-C
Solar Radiation	505.5	I
Humidity	507.5	II
Dust Blowing	510.5	I
Vibration	514.6	I
Shock Functional	516.6	I

All stated specifications are subject to change without notice or obligation.

Brochures Name	Size
IDAS™ Digital Simulcast	1.71MB
IC-FR5300/IC-FR6300	1.31MB

IC-FR5300
IC-FR6300

Two Channels in One Box Repeater, Compatible with Affordable Digital Simulcast

Completely New CPU/FPGA Platform

System Scalability

D-SUB 25-Pin Accessory Connector

50W Output at 50% Duty Cycle or 25W 100% Duty Cycle Operation*

50W Output at 100% Duty Cycle or 100W 50% Duty Cycle Operation with Optional Power Amplifier*

Capable of Installing Two RF modules in One Chassis

Digital/Analog Mixed Mode and Multiple Tone-Group Using CTCSS, DTCS Tone and RAN

32 Channel Capacity and 5 Programmable Buttons

IP Remote Maintenance

Other Features

Rear Panel View

General

Transmitter

Receiver

Applicable U.S. Military Specifications

MICROPHONES

HM-152

SM-26

EXTERNAL SPEAKERS

SP-35

SP-35L

SOFTWARE

CF-FR5000MC

CF-FR5000MT

CF-FR5300SC

CHANNEL MODULES

UR-FR5300

UR-FR6300

GPS ANTENNAS

UX-241

INTERNAL UNITS

UC-FR5300

Catalogs / Brochures

Instruction Manual / Guides

IC-FR5300 IC-FR6300

Two Channels in One Box Repeater, Compatible with Affordable Digital Simulcast

Completely New CPU/FPGA Platform

System Scalability

D-SUB 25-Pin Accessory Connector

50W Output at 50% Duty Cycle or 25W 100% Duty Cycle Operation*

50W Output at 100% Duty Cycle or 100W 50% Duty Cycle Operation with Optional Power Amplifier*

Capable of Installing Two RF modules in One Chassis

Digital/Analog Mixed Mode and Multiple Tone-Group Using CTCSS, DTCS Tone and RAN

32 Channel Capacity and 5 Programmable Buttons

IP Remote Maintenance

Other Features

Rear Panel View

General

Transmitter

Receiver

Applicable U.S. Military Specifications

MICROPHONES

HM-152

SM-26

EXTERNAL SPEAKERS

SP-35

SP-35L

SOFTWARE

CF-FR5000MC

CF-FR5000MT

CF-FR5300SC

CHANNEL MODULES

UR-FR5300

UR-FR6300

GPS ANTENNAS

UX-241

INTERNAL UNITS

UC-FR5300

Catalogs / Brochures

Instruction Manual / Guides

IC-FR5300
IC-FR6300