VHF AND UHF DIGITAL TRANSCEIVERS

IC-F3262D
IC-F4262D

Series

Advanced IDAS™ Digital Handheld with Built-in GPS and Waterproof Protection

VHF/10-keypad/IDAS DIGITAL

IC-F3262DT

VHF/Simple key/IDAS DIGITAL

IC-F3262DS

UHF/10-keypad/IDAS DIGITAL

IC-F4262DT

UHF/Simple key/IDAS DIGITAL

IC-F4262DS

General

IC-F3262DT/DS

IC-F4262DT/DS

Frequency coverage

136–174 MHz

400–470 MHz

Number of channels

512 channels/128 zones

Channel spacing

25/20/12.5/6.25kHz

Type of emission

16K0F3E/14K0F3E/8K50F3E/4K00F1E/F1D

Current drain
(approx.)
Tx High (at 5W)

1.7A

1.8A

Rx Rated output

550mA

Standby

160mA

Dimensions (W×H×D)
(projections not included)

53.5×142.7×39.5 mm
(With BP-232WP)

Weight (approx.)

410g
(with BP-232WP,
MB-94R & FA-SC55V)

400g
(with BP-232WP,
MB-94R & FA-SC57U)

Transmitter

IC-F3262DT/DS

IC-F4262DT/DS

RF output power (at 7.5V DC)

5W, 2W, 1W
(Hi, L2, L1)

Spurious emissions

0.25μW (≤1GHz),
1.0μW (>1GHz)

Frequency stability

±1.0ppm

Audio harmonic distortion

1.5% typ. (AF 1kHz 40% deviation)

Residual modulation

48/47/42dB typ. (Wide, middle, narrow)

FSK error

2.0% typ.

Receiver

IC-F3262DT/DS

IC-F4262DT/DS

Sensitivity Analogue

−4dBμV emf typ. (at 20dB SINAD)

Digital

−8dBμV emf typ. (at 5% BER)

Adjacent channel selectivity

78/78/68/60dB typ. (Wide, middle, narrow, digital)

Spurious response rejection

76dB typ.

Intermodulation

67dB typ. (Wide, narrow)
73dBμ emf typ. (Digital)

AF output power
(at 5% distortion)

800mW typ. (Internal SP, 12Ω load)
1000mW typ. (External SP, 8Ω load)

GPS (Depending on version)

IC-F3262DT/DS

IC-F4262DT/DS

Receiver channels

12 channels

Time to first fix (cold start)

36 seconds typ. (at open sky)

Horizontal accuracy

5m (at open sky)

Function Comparison and Internal Unit Options

IC-F3262DT/DS
IC-F4262DT/DS
(IDAS dPMR version)

IC-F3262DT/DS
IC-F4262DT/DS
(IDAS NXDN version)

Number of option slots 0 0
CTCSS/ DTCS encoder Available Available
decoder Available Available
2-Tone encoder Available Available
decoder Available Available
5-Tone encoder Available Available
decoder Available Available
DTMF autodial Available Available
DTMF decoder Available Available
Voice Scrambler Analogue
(Inversion)
Available Available
Digital Available Available
IDAS dPMR Tier 2 Mode1/2 Available -
Tier 2 Mode 3 Available -
IDAS NXDN Conventional - Available
Type-D trunking - Available
MPT 1327 - -
BIIS 1200 Available Available
MDC 1200 - Available
LTR™ trunking - Available
Man Down function Available
(Depending on version)
Available
(Depending on version)
GPS Available
(Depending on version)
Available
(Depending on version)
Intrinsically safe - -

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 G
Method, Proc.
Low Pressure Storage

500.5 I

Low Pressure Operation

500.5 II

High Temperature Storage

501.5 I

High Temperature Operation

501.5 II

Low Temperature Storage

502.5 I

Low Temperature Operation

502.5 II

Temperature Shock

503.5 I-C

Solar Radiation

505.5 I

Rain Blowing

506.5 I

Rain Drip

506.5 III

Humidity Induced

507.5 II

Salt Fog

509.5

Dust Blowing

510.5 I

Vibration

514.6 I

Shock Functional

516.6 I

Shock Transit Drop

516.6 IV

Also meets equivalent MIL-STD-810 -C, -D, -E and -F.

Ingress Protection Standards (IC-F3262D/F4262D, BP-232WP and HM-184)
Dust & Water

IP67 (Dust-tight and waterproof protection)


All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • Battery pack, BP-232WP
  • Belt clip, MB-94R
  • Antenna

Please note that a Battery charger must be purchaed separately.