General
| Frequency coverage | USA Version | Transmit | 144–148, 430–450MHz |
|---|---|---|---|
| Receive | 118–174, 375–550MHz*1 | ||
| No. of memory channels | 1052 channels (including 50 scan edges and 2 Call) |
||
| Type of emission | F2D, F3E (FM, FM-N) | ||
| Frequency stability | ±2.5ppm | ||
| Power supply requirement | 13.8V DC ±15% | ||
| Current drain (approximate) |
Tx | 13A | |
| Rx | 1.8A/1.2A (Max. audio/Stand-by) |
||
| Antenna impedance | 50Ω (SO-239) | ||
| Operating temperature range | −10°C to +60°C; 14°F to +140°F | ||
| Dimensions (W×H×D Projections are not included) |
Main unit | 150×40×151 mm; 5.91×1.57×5.94 in |
|
| Controller | 150×50×27.2 mm; 5.91×1.97×1.07 in |
||
| Weight (approx.) | Main unit | 1.2 kg; 2.65 lb | |
| Controller | 140 g; 4.94 oz | ||
Guaranteed range:
*1 144–148, 430–450MHz.
*2 144–148, 430–440MHz
Transmitter
| Output power (at 13.8V DC) | 50W, 15W, 5W (TPE version: 25W, 15W, 5W) | |
|---|---|---|
| Max. frequency deviation | ±5.0kHz/±2.5kHz (W/N) | |
| Spurious emissions | Less than −60dBc | |
| Microphone impedance | 600Ω (8-pin modular) | |
Receiver
| Intermediate frequencies | A band | 38.85MHz/450kHz |
|---|---|---|
| B band | 46.35MHz/450kHz | |
| Sensitivity (at 12dB SINAD) | Less than 0.18μV | |
| Selectivity | More than 60dB/55dB (W/N) | |
| Spurious response rejection | A band | More than 60dB/55dB (V/U) |
| B band | More than 60dB/60dB (V/U) | |
| Audio output power | More than 2W (10% dist. 8Ω) | |
| External speaker connector | 2 conductor 3.5 (d) mm (1/8″)/8Ω | |
| Receiver sensitivity (Not guaranteed, for your reference only) |
FM/FM-N (12dB SINAD) |
137–159.995MHz*: Less than 0.32μV 160–174.000MHz: Less than 0.56μV 375–399.995MHz: Less than 0.56μV 400–499.995MHz*: Less than 0.32μV 500–550.000MHz: Less than 0.56μV |
| AM/AM-N (10dB S/N) |
118–136.991MHz: Less than 1μV | |
* Except amateur bands.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard |
MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D -E and -F.
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Hand microphone, HM-207
- Controller cable
- Microphone hanger
- DC power cable
- Spare fuse
Close