VHF/UHF TRANSCEIVERS

IC-V86
IC-U86

7 W Output Power and 1500 mW Audio

2M with Powerful Audio
The IC-V86 gives you more audio, more RF power, more coverage, and more battery capacity in a compact, MIL-STD portable. With 1.5W of receive audio power and a new chassis design, the IC-V86 enables users to hear incoming signals in loud, noisy environments. The IC-V86 expands users' radios coverage with 7W of RF output power, and the new 2250mAh Li-Ion battery pack provides longer operational capabilities.

VHF

IC-V86

UHF

IC-U86

* Wide open space

7 W Output Power and 1500 mW Audio

* Wide open space. Approximate, comparing the IC-V86 with the IC-V80. Communication range may differ depending on operating environment or weather conditions, etc. 7 W output power is only for theIC-V86.

1500 mW powerful audio

1500 mW Powerful Audio and 1.5 Times* Higher Sound Pressure

* Approximate, comparing the IC-V86 with the IC-V80.

Optional 1500 mW Speaker-Microphone, HM-222HLWP

The combination of the optional HM-222HLWP and the IC-V86/U86* also provides 1500 mW (typ.)  loud audio from the attached speaker-microphone.

* For the transceiver  with a "U" mark on the serial number label.

Dust-Protection, Water Resistance and a Tough Body
(IP54 and MIL-STD 810G)

19 hours* of Long Lasting Battery Life

* EX Hi power with BP-298. TX : RX : standby = 5 : 5 : 90 (3 sec. : 3 sec. : 54 sec. ) (The Power Save function is set to "P–S.16")

No PC Programming Necessary, Settings Changeable from the Radio*

* PC programming is also available.

Durable BNC Type Antenna Connector

Made in Japan Quality and Reliability

Other Features

  • Audio volume/VFO mode/Memory channel mode can be changed with the rotary knob
  • Supplied BC-240, battery charger with a charging control function that prolongs the life of the battery
  • Integrated VOX function
  • 200 memory channels, 1 Call channel and 6 scan edges
  • Built-in CTCSS and DTCS encoder/decoder
  • Priority, program, memory, skip and tone scanning    

General

IC-V86 IC-U86
Frequency range
(TX/RX guaranteed range)

TX: 144–148 MHz
RX: 136–174 MHz

TX: 430–450 MHz
RX: 400–472 MHz

Type of emissions

F2D, F3E (FM, FM-N)

Number of channels

207 channels (200 memory channels, 1 call channel and 6 scan edges)

Antenna impedance

50Ω

Power supply requirement

7.5V DC

Operating temperature range

–20 ˚C to +60 ˚C, –4 °F to +140 °F

Frequency stability

±2.5ppm (–20 ˚C to +60 ˚C, –4 °F to +140 °F)

Current drain

(For the transceiver  with a "U" mark on the serial number label)

TX
(EX Hi/Hi/Mid/Low)
1.6/1.4/1.0/0.5 A typical EXP1: 1.6/1.5/1.0/0.5 A typ.
EXP2: 1.6/1.4/0.9/0.5 A typ.
RX
(Max. audio)

450 mA typ. (INT SP),
190 mA typ. (EXT SP, Single end)
450 mA typ. (EXT SP, BTL)

450 mA typ. (INT SP),
190 mA typ. (EXT SP, Single end)
450 mA typ. (EXT SP, BTL)

Dimensions (W×H×D)
(Projections not included)

58.6 × 112 × 30.5 mm,
2.3 × 4.4 × 1.2 in
(with BP-298)

Weight (Approximate)

300 g, 10.6 oz
(with BP-298, FA-B57V)

290 g, 10.2 oz
(with BP-298, FA-B57U)

Transmitter

IC-V86 IC-U86
Output power
(EX Hi/Hi/Mid/Low)

7.0/5.5/2.5/0.5 W

5.5/4/2/0.5 W

Maximum frequency deviation

±5.0 kHz/±2.5 kHz (Wide/Narrow)

Spurious emissions

Less than –60 dB

External microphone connector

3-conductor 2.5 (d) mm (1/10")/2.2 kΩ

Receiver

IC-V86 IC-U86
Sensitivity

–124 dBm typical

EXP1: –121 dBm typical
EXP2: –123 dBm typical

Squelch sensitivity

–126 dBm typical

EXP1: –123 dBm typical
EXP2: –125 dBm typical

Selectivity (Wide/Narrow)

75 dB typical/
70 dB typical

70 dB typical/
68 dB typical

Intermodulation

65 dB typical

Audio output power
(For the transceiver  with a "U" mark on the serial number label)
Internal SP

1500 mW typical (with 8 Ω load)

External SP

450 mW typical (single end)
1500 mW typical (BTL, HM-222HLWP connected) 

External speaker connector

3-conductor 3.5(d)mm (1/8″)/8Ω

Applicable U.S. Military Specifications

Standard
 
MIL-810 G
Method Procedure
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D -E and -F.

Applicable IP Rating

Ingress Protection Standard
Dust and Water IP54 (Dust-protection, water resistance)

All stated specifications are subject to change without notice or obligation

Supplied Accessories

  • BP-298/BP-264, battery pack*
  • BC-240, Desktop charger
  • BC-242, AC adapter
  • MB-124, belt clip
  • Antenna*

* May differ, depending on transceiver version

SP-AT1

Catalogs / Brochures

Brochures Name Size
IC-V86/IC-U86(Amateur) 3.85MB

Instruction Manual / Guides

Name Model Name Note
BASIC MANUAL IC-V86/IC-U86
ADVANCED MANUAL IC-V86/IC-U86