VHF FM TRANSCEIVERS
IC-V80
Rugged and Basic 2 M with Powerful Audio!
Perfect for long shelf-life use, such as emergency kits. Same output power (5.5/2.5 or 0.5 Watt selectable) as the standard V80. The V80 SPORT comes with an alkaline tray that will hold 6 AA size batteries*. No charger required. *Batteries are not included.
750 mW loud audio
The IC-V80/E uses the BTL (bridge-tied load) amplifier that doubles the audio output. The 36 mm large speaker delivers 750 mW of loud and intelligible audio*. Great for noisy environments.
* Typical value using with internal speaker.
Powerful 5.5 W of output power
The IC-V80/E offers a just-right mix of power and size. 5.5 watts of high power will work to get your message through. Get up to 19 hours* of operating time with the Li-ion battery pack (BP-265) or 13 hours with the Ni-MH (BP-264). All that power comes is an easy to hold and use size - not too big, not too small.
* Typical operation. 5:5:90 duty cycle with power save on.
IP54 and MIL-STD-810 rugged construction
The dust protection and water-resistance equivalent to IP54 provides reliable operation for practical outdoor operation. The IC-V80/E tested to and passed 11 categories of MIL-STD-810 environmental tests.
A total of 207 memory channels
The IC-V80/E has a total of 207 memory channels, including 200 regular channels, 6 scan edges and 1 call channel. The channel name is programmable with 5 characters for easy recognition.
Built-in CTCSS/DTCS
The CTCSS and DTCS tone codes provide quiet stand-by and allow you to use tone-access repeaters. The pocket beep alerts you when a matching tone frequency is received. The tone scan detects the subaudible tone that is used for repeater access.
Internal VOX function
The IC-V80/E has internal VOX (Voice Operated Transmit) function for convenient handsfree operation with a compatible optional headset and plug adapter cable. Also, the VOX gain and VOX delay time are adjustable.
IC-V80 SPORT: The Rugged Version
Perfect for long shelf-life use, such as emergency kits. Same output power (5.5/2.5 or 0.5 Watt selectable) as the standard V80. The V80 SPORT comes with an alkaline tray that will hold 6 AA size batteries*. No charger required. *Batteries are not included.
Make the V80 SPORT part of your amateur radio communications plan, for emergency or everyday use.
Other features
- WX channel and weather alert function (USA version only)
- Program, memory, skip, priority and tone scans
- Power save function
- BNC type antenna connector
- Automatic repeater function (USA version only)
- 1750Hz tone for European repeater access (IC-V80E only)
- TOT (time out timer) setting
- Repeater lockout and busy channel lockout
- PC programmable with optional CS-V80
- Transceiver-to-transceiver cloning (Optional)
- Direct keypad frequency entry
- DTMF autodial memories
- Auto power off
- LCD backlight
- Wide/narrow channel spacing
General
Frequency coverage |
IC-V80 (U.S.A.) Tx: 144 - 148 MHz Rx: 136 – 174 MHz IC-V80E (Europe) Tx・Rx: 144 - 146 MHz |
||
---|---|---|---|
Current drain (approx.) |
TX High | 1.4 A (typ.) | |
RX Max. audio/Stand-by |
310 mA with Internal speaker (typ.) 180 mA with External 8 Ω speaker (typ.) 65 mA (typ.) during stand-by 20 mA (typ. 9 during Power save |
||
Dimensions (W×H×D) (Projections not included) |
52.2×111.8×22.3 mm (with BP-264) |
||
Weight |
140 g; 4.9 oz (without Battery pack) |
Transmitter
Output power (at 7.5V) |
5.5/2.5/0.5 W |
|
---|---|---|
Max. frequency deviation |
±5.0 kHz/±2.5 kHz (Wide/Narrow) |
|
Spurious emissions |
Less than -60B |
|
Ext. microphone connector |
3-conductor 2.5(d) mm (1/10″)/2.2 kΩ |
Receiver
Sensitivity |
0.14 μV typ. (at 12 dB SINAD) |
||
---|---|---|---|
Squelch sensitivity |
0.1 μV typ. (at threshold) |
||
Selectivity |
70 dB/50 dB typ. (Wide/Narrow) |
||
Intermodulation |
70 dB/65 dB typ. (Wide/Narrow) |
||
Spurious and image rejection |
75 dB (typ.) |
||
Audio output power | Internal SP |
750 mA typ. (16 Ω load) |
|
External SP |
450 mW typ. (8 Ω load) |
||
External speaker connector |
3-conductor 3.5(d)mm (1/8″)/8 Ω |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard | MIL-810 G Method, Proc. |
---|---|
Low Pressure Storage |
500.5 I |
Low Pressure Operation |
500.5 II |
High Temperature Storage |
501.5 I |
High Temperature Operation |
501.5 II |
Low Temperature Storage |
502.5 I |
Low Temperature Operation |
502.5 II |
Temperature Shock |
503.5 I-C |
Solar Radiation |
505.5 I |
Rain Blowing |
506.5 I |
Rain Drip |
506.5 III |
Humidity Induced |
507.5 II |
Salt Fog |
509.5 |
Dust Blowing |
510.5 I |
Immersion |
512.5 I |
Vibration |
514.6 I |
Shock Functional |
516.6 I |
Shock Transit Drop |
516.6 IV |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Applicable IP Rating
Ingress Protection Standards | |
---|---|
Dust & Water |
IP67 (Dust-tight and waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Battery pack*
- Antenna*
- Belt clip*
- Battery charger*
- AC adapter*
* Not supplied, or the shape is different, depending on the version.