New 
MULTI-USE RADIO SERVICE (MURS) TRANSCEIVER

IC-V3MR

Rugged, Loud and Reliable

ZOOM
ZOOM
ZOOM

For basic operations, the V3MR provides an entry level license free Multi-Use Radio Service (MURS) option. Everything to start communications comes ready to use straight out of the box, including a li-ion battery, antenna, and a charger. This simple and professional grade two-way radio is fit for hospitality, construction, personal use, and more.

ZOOM
ZOOM
ZOOM
Open

Rugged, Loud and Reliable
License Free Radio for Professional Use

IP54 and MIL-STD 810G Tough and Rugged Body

While the radio is a compact unit with a height of only 111 mm, the radio is tested to dust protection and water resistant equivalent to IP54 and 11 categories of MILSTD- 810 environmental tests. In short, the IC-V3MR is built rugged!

1500 mW (typ.) Powerful Audio with BTL Amplifier

The radio provides 1500 mW (typ.)* loud and clear audio with Icom custom high power handling capacity speaker. Clear communication is available even in noisy environments.

* Typical with internal speaker

Optional 1500mW Speaker-Microphone, HM-222HLWP

The combination of the optional HM-222HLWP and the IC-V3MR also provides 1500 mW(typ.) * loud audio from the attached speaker-microphone.

* Typical with optional speaker-microphone, HM-222HLWP

2 Watts Output and All 5 MURS Frequencies for Business Use

The IC-V3MR is a professional-grade, license-free MURS radio is ready for any kind of operation. Take advantage of the large communication range*: up to 250,000 square feet in buildings, 20 floors, and up to two miles in a traditional worksite. This radio is suited for service, education, health, tourism, personal use, and more!

* Ranges may differ depending on operating environment.

High Capacity Li-ion Battery 24 hours Operational Time (5/5/90 duty)

A low power consumption design and the supplied 2250 mAh (typ.) Lithium-Ion battery allow use of the radio for more than 24 hours*.

*5:5:90 duty ratio for transmit: receive: stand-by (with power save function)

Made in Japan Quality Full Robotic Assembly

The IC-V3MR is made by Icom’s full robotic assembly line in Japan. It can maintain stable high quality through the production process.

Other Features

  • VOX (Voice Operated Transmit) function
  • MDC PTT ID transmit
  • CTCSS Tone and DTCS code
  • DTMF functions
  • Emergency and Lone Worker functions
  • 2-step low battery beep
  • Customizable settings with PC programming software (free download)
  • FCC Certified

Communication Range

Communication range may differ depending on operating environment or weather conditions, etc.

SPECIFICATIONS

IC-V3MR
Usable Frequencies and (bandwidth)

151.820 MHz (11.25 kHz), 151.880 MHz (11.25 kHz),
151.940 MHz (11.25 kHz), 154.570 MHz (20.00 kHz),
154.600 MHz (20.00 kHz)
Number of Memory channels  16 ch
Transmit output power 2 W (High), 1 W (Mid), 0.5 W (Low)
Receiver sensitivity 0.25 μV (typical) for 12 dB SINAD
Squelch sensitivity 0.25 μV (typical) at squelch threshold point
Audio output power
(at 5% distortion, 8 Ω load)		 Internal SP 1.5 W (typical)
External SP 0.4 W (typical)
HM-222HLWP 1.5 W (typical)
Antenna impedance 50 Ω
Power supply Voltage 7.2 V DC
Current drain Receive stand-by 75 mA
Receive max. audio 500 mA
Transmit (High) 0.9 A
Dimensions (Projections not included) 58 (W) × 111 (H) × 35.5 (D) mm,
2.3 (W) × 4.4 (H) × 1.4 (D) in (with BP-298)
Weight (Approximate) 265 g, 9.3 oz (with BP-298)

All stated specifications are subject to change without notice or obligation.
Measurements made in accordance with TIA-603.

Applicable U.S. Military Specifications

Standard
MIL-810 G
Method
Procedure
 Simple explanation
(radio specifications are not changed after each test)
Low Pressure

500.5

I, II

 Keep the transceiver 20℃/101.3 kPa and
25℃/57.2 kPa for a total of 7 hours
High Temperature

501.5

I, II

 Keep the transceiver between 30 to 63℃ for a total of 168 hours
Low Temperature

502.5

I, II

 Keep the transceiver at -25℃ for 4 hours
Temperature Shock

503.5

I-C

 Keep the transceiver at -51℃/2 h and +71℃/2 h × 3 cycles (total 12 hours)
Solar Radiation

505.5

I

 Keep the transceiver at 49℃ and 1120 W/m2 for 24 h × 3 cycles (for a total of 72 hours)
Rain Blowing/Drip

506.5

I, III

 I : Blast 1.7 mm/min rain with 18 m/s wind for
30 min to 6 surfaces (for a total of 180 min)
III: Drip water 2800 l/m2/h for 15 min.
Humidity

507.5

II

 Keep the transceiver at 95% humidity with 30℃ and 60℃ for 240 hours.
Salt Fog

509.5

-

 Spray 5% salt water with 1-3 ml/h at 80 cm 2 under 35℃/95% condition for 24 hours then dry it under 24℃/50% condition × 2 cycles
Dust Blowing

510.5

I

 Blowing talc powder Temp/time: 23℃/6 h and 60℃/6 h, humidity: less than 30%, wind speed: 8.9 m/s, powder density: 10 ±7 g/m3
Vibration

514.6

 I Vibrate the transceiver at each 3 axis (X, Y, Z), frequencies 5 – 500 Hz, 1.05 G for 1 hour
Shock

516.6

I, IV

 When packing, drop 1.22 m height for
6 surfaces, 8 corners, 12 edges (total 26 drops)

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standards

Dust & Water

IP54 (Dust-protection and water resistant)

Supplied Accessories

  • Battery Pack, BP-298
  • Rapid Charger, BC-240
  • AC Adapter, BC-242
  • Belt Clip, MB-124
  • Antenna, FA-SC28V

Catalogs / Brochures

Brochures Name Size
IC-V3MR 867KB

Instruction Manual / Guides

Name Model Name Note
INSTRUCTION MANUAL IC-V3MR
INSTRUCTIONS IC-V3MR

IC-V3MR