New
VHF MARINE TRANSCEIVER

IC-M410BB

VHF Marine Transceiver

Icom’s M410BB is a flexible black box fixed mount that provides VHF communications for vessels with limited helm space. The supplied CommandMic™ controls the radio for essential communications on the water.

ZOOM

ZOOM

Open

High-Performance Black Box VHF Fixed Mount

Remote Stations

Up to 2

One CommandMic™ included with radio, HM195GB or HM195GW depending on the version

Output Power

25W

GPS

Internal GPS GNSS Receiver, with external GPS antenna connection

NMEA

NMEA 2000®/ NMEA 0183® -HS

Waterproof Rating

IPX7

Clean Installation for Limited Helm Space

The M410BB consists of a CommandMic™ and black box RF unit. Use the CommandMic™ for all operations including DSC. Install the RF unit out-of-sight, place up to 60 ft (18.3 m)* away from the CommandMic™.

*Two OPC-1541 cables are required for the 60 ft installation

CommandMic™ Stations

Add an additional CommandMic™ to extend communication points for boats requiring a second comms station. This is ideal for boats needing communication between the cockpit and other locations on the boat. Access the intercom functions for one-to-all or one-to-one communications on the boat.

Open Top Boat
the waterproof CommandMic™ can be used in open top areas even in rain or splash conditions.

Class D DSC Functionality

On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M410BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel.

NMEA 2000® and NMEA 0183®-HS

The NMEA 2000® network provides plug-and-play data communication to inter-connect other marine equipment such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.

Loud One-Way RX Hailer

The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also sound foghorn patterns from the hailer speaker.

Active Noise Cancelling

The Active Noise Cancelling function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.

Other Features:

AquaQuake™ function
Anchor watch function

	M510BB	M410BB	M400BB
CommandMic™ Stations	3 stations (up to 2 options)	2 stations (optional 1 station)	1 station
Intercom function	Yes	Yes	No
Class D DSC & Distress	Yes	Yes	No
AIS Receiver	Yes	No	No
Integrated GPS (GNSS) receiver	Yes	Yes	No
Active Noise Cancelling	Yes	Yes	Yes
Voice Recording & Playback	Yes	No	No
NMEA Interface	NMEA 2000® NMEA 0183® -HS	NMEA 2000® NMEA 0183® -HS	NMEA 0183®
DSC Remote Control Interface	Yes (EN 300 338-8)	No	No
RX Hailer and Foghorn	Yes (one-way)	Yes (one-way)	Yes (one-way)

Specifications

General
Frequency range Tx Rx DSC	156.025 ~ 157.425 MHz 156.050 ~ 163.275 MHz 156.525 MHz
Usable channels	USA, INT, CAN, WX channels
Type of emission	16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*
Power supply requirement	13.8 V DC nominal (11.7 ~ 15.9 V DC) (Negative ground)
Current drain (at 13.8 V DC) TX Max. power RX Max. audio	5.5 A Max. 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer)
Operating temperature range	–20°C ~ 60°C, –4˚F ~ 140˚F
Antenna impedance	50 Ω nominal
Dimensions (Projections not included) RF unit (W × H × D) CommandMic™ (W × H × D)	216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in
Weight (approx.) RF unit CommandMic™	890 g; 2 lb. 400 g; 14.1 oz

Transmitter
Output power (at 13.8V DC)	25 W, 1 W (High, Low)
Max. frequency deviation	±5 kHz
Frequency tolerance	±0.5 kHz
Spurious emissions	Less than –70 dBc (High power), Less than –56 dBc (Low power)
Residual modulation	More than 40 dB
Adjacent channel power	More than 70 dB

Receiver
Sensitivity FM (at 12dB SINAD) DSC (at 1% BER)	0.22 μV typical –7 dBμ emf typical
Adjacent channel selectivity FM DSC (1% BER)	More than 70 dB More than 73 dBµ emf
Spurious response FM DSC (1% BER)	More than 70 dB More than 73 dBμ emf
Intermodulation FM DSC (1% BER)	More than 75 dB More than 68 dBµ emf
Hum and noise	More than 40 dB
Audio output power CommandMic™ Rx hailer	More than 2 W (4 Ω, 10% distortion) More than 15 W (4 Ω)

Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation. Showing specifications for the USA versions.

Applicable IP Rating