|
General
|
|
Frequency coverage
|
136-174 MHz
400-470 MHz, 450-520 MHz
|
|
Number of channels
|
Max. 32 channels
|
|
Channel spacing
|
6.25/12.5/25 kHz
7.5/15.0/30 kHz
|
|
PLL channel step
|
2.5, 3.125 kHz
|
|
Frequency stability
|
±0.5ppm
|
|
Operating temperature range
|
-30°C to +60°C
-22°F to +140°F
|
|
Power supply voltage
|
13.6V DC
|
|
Current drain (at 13.6 V DC)
Tx
Rx
|
50W
Max. audio
Stand-by
|
15A
1.9A
500mA
400mA (FAN, LCD backlight off)
|
|
|
Antenna impedance
|
50Ω (Type-N × 2)
|
|
Dimensions (W×H×D)
|
483 × 88 × 260 mm
191⁄32 × 315⁄32 ×
101⁄4 in
|
|
Weight
|
5.6 kg; 12.3lb (approx.)
|
|
Transmitter
|
|
Output power
|
50W (adjustable to 5W)
25W at 100% duty cycle
|
|
Max. frequency deviation
|
±5.0 kHz/±2.5 kHz (wide/narrow)
|
|
Spurious emissions
|
80dB typ.
|
|
Adjacent channel power
|
73/67dB typ. (wide/narrow)
|
|
FM Hum and noise
|
50/45dB typ. (wide/narrow)
|
|
Audio harmonic distortion
|
1% typ. (40% deviation)
|
|
Microphone impedance
|
600Ω (8-pin modular)
|
|
Receiver
|
Sensitivity
FM (W/N)
Digital
|
0.30µV typ. (at 12dB SINAD)
0.25µV typ. (at 5% BER)
|
|
Spurious response
|
90dB
|
|
Intermodulation rejection ratio
|
78dB
|
|
Hum and noise ratio
|
50/45dB (wide/narrow)
|
|
Audio output power
|
4.0 W typ. at 5% distortion with a 4 ohm load
|
|
External speaker connector
|
2-conductor 3.5 (d) mm (1⁄8″)/4Ω
|
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and pased the following MIL-STD
requirements and strict environmental standards.
|
Standard
|
MIL 810F
|
|
Method
|
Proc.
|
|
High Temperature
|
501.4
|
I, II
|
|
Low Temperature
|
502.4-3
|
I, II
|
|
Dust
|
510.4
|
I
|
|
Vibration
|
514.4
|
I
|
|
Shock
|
516.5
|
I
|
Also meets equivalent MIL-STD-810-C, -D and -E.
Measurements made in accordance with TIA-603 (for Analog FM). All stated specifications
are subject to change without notice or obligation.
Supplied Accessories
- DC power cable
- Handle kits
- Key assign stickers
Rear View
