English | Español | Português
Icom America - 2 way radios

IP730D Series

LTE / IDAS™ / Analog Portable

Specifications

Specifications

General

Audio output power
Internal SP
External SP
HM-222H

1500 mW typical (8Ω load, 10% distortion)
1000 mW typical (8Ω load, 10% distortion)
1500 mW typical (8Ω load, 10% distortion)
Operating temperature -30 °C to +60 °C, -22 °F to +140 °F
Power supply voltage 7.5V DC nominal
Current drain (approx.)
Receive
Transmit

Max. audio (INT SP) 520 mA, Stand-by 300 mA
Hi (5W) 1.8A
Dimensions
(H x W x D)

140.5 × 61.7 × 42.8 mm, 5.5 × 2.4 × 1.7 in (with BP-303)
Weight 320g, 11.3 oz (with BP-303)
Bluetooth® technology Version: 4.2, Output: Class 2, Protocol: HFP, HSP

LTE (4G) / W-CDMA (3G)

Network LTE (4G): B2, B4, B12
W-CDMA: B2, B5
Rated output power 0.25W
Receiver sensitivity (QPSK) -102 dBm typ.
Compatibility IP501H, IP503H, IP501M, IP500APP, VE-PG4

IDAS™ Analog/Digital

General IP730D IP740D
  Frequency range 136 - 174 MHz 350 - 470 MHz, 400 - 520 MHz
  Conventional Channels 128 channels / 8 zone
  Type of emission 11K0F3E (15.0 kHz), 4K00F1E, 4K00F1D (6.25 kHz)
Transmitter IP730D IP740D
  Output power (Hi, L2, L1) 5W, 2W, 1W
  Frequency stability ±1.0 ppm
  Spurious emissions
  
70 dB min.
0.25 µW (≤ 1 GHz), 1.00 µW (> 1 GHz)
90 dB typ.
0.25 µW (≤ 1 GHz), 1.00 µW (> 1 GHz)
  FM hum and noise
  (Without CCITT filter)
34 dB min. 72 dB typ.
  FSK error 5% max., 1% typ.
Receiver IP730D IP740D
  Sensitivity
    Digital (1% BER)
    Analog (12 db SINAD)
    Analog (20 db SINAD)

0 dBµV emf max. (0.5 µV max.)
0.32 µV emf max.
0 dBµV emf max. (0.5 µV max.)

-7 dBµV emf typ. (0.22 µV typ.)
0.17 µV typ.
02 dBµV emf typ. (0.4 µV typ.)
  Adjacent channel selectivity
    Digital
    Analog

50 dB min.
60 dB min.

63 dB typ.
67 dB typ.
  Intermodulation rejection
    Digital

    Analog

71 dBµV emf min.

70 dB min. (TIA-603)
65 dB min. (EN300 086)

73 dBµV emf min.

72 dB typ. (TIA-603)
66 dB typ. (EN-300 086)
  Hum and noise
  (Without CCITT filter)

34 dB min.

60 dB typ.

Measurements made in accordance with 3GPP TS-36, TIA-603, EN300 086 and EN301 166. All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications

Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.

Standard MIL 810 G
Method Proc
Low Pressure 500.5 I, II
High Temp. 501.5 I, II
Low Temp. 502.5 I, II
Temp. Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standard
Dust & Water IP67 (Dust-tight and waterproof)

Supplied Accessories

  • BP-303 battery pack
  • MB-133 belt clip

  

View our blog