English | Español | Português
Icom America - 2 way radios

FR5200H / FR6200H

IDAS VHF/UHF Digital Repeaters

Specifications

Specifications

General
Frequency coverage

FR5200H

136–174MHz

FR6200H

400–470, 450–512MHz

Number of channels Max. 32 channels
Channel spacing

FR5200H

6.25/12.5kHz

FR6200H

6.25/12.5kHz

Type of emission 16K0F3E, 11K0F3E/F7E/F7D/F7W, 4K00F1E/F1D/F3E
Frequency stability ±0.5ppm
Antenna impedance 50Ω (Type-N × 2)
Operating temperature range –30˚C to +60˚C; –22˚F to +140˚F
Power supply voltage 13.6V DC

 

Current drain (at 13.6 V DC)
Tx 50W
Rx Max. audio/Stand-by

FR5200H

 

11A

1.2A/500mA (LCD backlight OFF)

FR6200H

 

11A

 1.2A/450mA (LCD backlight OFF)

Dimensions (W×H×D) 483×88×360 mm ; 19.02×3.46×14.17 in
Weight 10kg ; 22lb (approx.)
Transmitter
Output power (100% duty cycle) 50W (adjustable to 5W)
50W (at 20–35˚C, 24 hours)
Max. frequency deviation ±5.0 kHz/±2.5 kHz (wide/narrow)
Spurious emissions 80dB typ.
FM Hum and noise

FR5200H

 

52/49dB typ. (W/N)

 

FR6200H

 

50/45dB typ. (W/N)

 

Audio harmonic distortion 1% typ. (40% deviation)
Digital FSK error 5% Max.
Microphone impedance  600Ω (8-pin modular)
Receiver
Sensitivity

12dB SINAD

5% BER

FR5200H

 

0.30μV typ.

0.25μV typ.

FR6200H

 

0.25μV typ.

0.25μV typ.

Adjacent channel selectivity

FR5200H

 

85/56dB typ. (W/N)

68dB typ. (Digital)

FR6200H

 

78/56dB typ. (W/N)

63dB typ. (Digital)

Spurious response

FR5200H

 

80dB (W/N)

75dBμV emf (Digital)

FR6200H

 

80dB (W/N)

 80dBμV emf (Digital)

Intermodulation rejection

FR5200H

 

78dB typ. (W/N)

75dBμV typ. emf (Digital)

FR6200H

 

78dB typ. (W/N)

 75dBμV typ. emf (Digital)

Hum and noise ratio

FR5200H

 

52/50/66dB typ. (W/N/D)

FR6200H

 

50/45/55dB typ. (W/N/D)

Audio output power 4.0W typ. at 5% distortion with a 4Ω load
External speaker connector  2-conductor 3.5 (d) mm (1⁄8")/4Ω

Applicable U.S. Military specifications

Icom makes rugged products that have been tested to and pased the following MIL-STD requirements and strict environmental standards.

Standard MIL 810G
Method Proc.
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I - C
Humidity 507.5 II
Vibration 514.6 I
Shock 516.6 I

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Measurements made in accordance with TIA-603-C (for FM) and EN 301 166 (for Digital). All stated specifications are subject to change without notice or obligation.

Supplied accessories

  • DC power cable
  • Handle kit
  • Key assign stickers
  • Mounting rack
  • Spare fuse

Rear View

Rear Panel View

 

View our blog