English | Español | Português
Icom America Home

IC-PCR2500

Communications Receiver

specifications

Specifications

General

Frequency coverage

Main receiver

 

Sub-receiver

 

 

France

 

0.010–3299.999MHz* (Guaranteed range 0.495–3000MHz)

0.495–1300MHz*,

50–1300MHz*

* Some frequency bands are blocked in the U.S.A. version.

 

0.010–29.999*,

50.200–51.200,

87.500–107.999,

144–146,

430–440,

1240–1300MHz

* Main receiver only. Guaranteed range 0.495–29.999MHz.
Mode

AM, FM, WFM, USB*1, LSB*1, CW*1, DV*2, P25*3

*1 0.01-1300MHz only.
*2 Optional UT-118 required.
*3 Optional UT-122 required.

Usable temperature range 0°C to +60°C
+32°F to +140°F
Frequency stability Less than ±3ppm on the basis of 25°C (0°C to +60°C)
Tuning steps 1Hz (minimum)
Power supply 12.0V DC ±15%

Current drain (at 12.0V DC)

Max. audio

Stand-by

 

Less than 1.5A (Dual mode)

0.85A typ. (Dual mode)

Antenna Impedance 50Ω (BNC)

Dimensions

(Projections are not included)

146×41×206 mm;

534×158×818 in (W×H×D)

Weight (approx:) 1350g; 3lb
Receiver
Receiver system Triple-conversion superheterodyne + Down converter
Intermediate frequencies
1st 266.70MHz
2nd 10.70MHz
3rd 450kHz (Except WFM)
Sensitivity (Less than)
  SSB, CW AM FM WFM
0.495–1.799MHz 5.0μV 25μV
1.8–49.999MHz 0.5μV 2.5μV 0.63μV*2
50–699.999MHz 0.4μV 2μV 0.5μV 1.4μV
700–1300.000MHz 0.5μV 2.5μV 0.63μV 1.8μV
1300*1–2299.999MHz 5.6μV 18μV
2300–3000.000MHz 18μV 56μV

*1 1300.000001 MHz

*2 28–49.999MHz
SSB, CW BW=2.8kHz, AM BW=6.0kHz at 10dB S/N FM BW=15kHz, WFM BW=230kHz at 12dB SINAD

Selectivity (typical)

SSB, CW, AM

SSB, CW, AM, FM

FM, AM

FM, AM, WFM

WFM

 

More than 2.8kHz/–6dB

More than 6.0kHz/–6dB

More than 15kHz/–6dB

More than 50kHz/–6dB

More than 230kHz/–6dB

Audio output power More than 500mW at 10% distortion with an 8Ω load
External SP connector 2-conductor 3.5 (d) mm (18″) /8Ω

Supplied Accessories

  • AD-113A/E*
  • USB cable and antenna
  • Software CD
  • Controller head and cable, (3.4m; 11.2ft)
    *Depending on version

PC requirements

For use with PC control software

  • Microsoft® Windows® XP/2000/ME/98SE
  • USB 1.1 or 2.0
  • Intel® Pentium® III 450MHz or faster (Pentium® 4 recommended)
  • Hard disk with at least 50 MB of free disk space
  • At least 128 MB of memory (256MB or more recommended)
  • Display with 1024 × 768 pixel resolution, high color
  • CD-ROM or DVD drive is required for software installation
  • USB audio dropouts or gaps may occur because of a lack of PC power
  • Additional hard disk space is required for recording sound or storing scope data

Rear view

All stated specifications are subject to change without notice or obligation.

View our blog