English | Español | Português
Icom America - 2 way radios

M200

VHF Marine Transceiver

Specifications

Specifications

General
Frequency Range
  Tx
  Rx
 
156.025–162􀀏000MHz
156.025–162.025MHz
Usable channels INT, USA, CAN channels
Type of emission
16K0G3E (FM)
Power supply voltage
13.8V DC nominal
1.5A (Maximum)
Current drain
  Tx (at 25W output)
  Rx (Maximum audio)
 
5.5A (Maximum)
200mA
Operating temperature range
–20°C to +60°C; –4°F to +140°F 
Antenna Impedance 50Ω
Dimensions (W×H×D)
(Projections not included)
153×67×133 mm;
6.0×2.6×5.2 inch
Weight (approximately) 790g; 1.7lb
Transmitter
Output power (Hi/Mid/Low) 25W (High power)
1W (Low power)
Modulation
Variable reactance frequency
modulation
Max. frequency deviation
±5kHz
Frequency stability
±5ppm
Spurious emissions Less than –70dBc (High power)
Less than –56dBc (Low power)
Adjacent channel power More than 70dB
Audio harmonic distortion Less than 10% (at 60% dev.)
Residual modulation
More than 40dB
Receiver
Intermediate frequency

1st

2nd


21.7MHz
450kHz
Sensitivity –14dBμ typ. (at 12dB SINAD)
Squelch sensitivity
Less than –10dBμ
Adjacent Channel Selectivity
75dB typical
Spurious response 75dB typical
Intermodulation 75dB typical
Hum and noise ratio
More than 40dB
Audio output power 4.5W typical
(at 10% distortion with a 4Ω load)

Applicable U.S. Military Standards

Standard MIL 810 G
Method Proc
Temp Shock 503.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5
Salt Fog 509.5
Vibration 514.6 I
Shock 516.6 II

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Applicable IP Rating

Ingress Protection Standard
Water IPX7 (Waterproof protection)

 

View our blog