English | Español | Português
Icom America - 2 way radios

F3360D / F4360D Series

IDAS™ Type-C Trunking Portables VHF/UHF

Specifications

Specifications

General
Frequency coverage
F3360DT/DS
136–174MHz
F4360DT/DS
400-470MHz
Number of channels 512 channels/128 zones
Type of emissions 8K50F3E, 8K30F1E/F1D, 4K00F1E/F1D
Channel spacing 15/12.5/6.25kHz
Power supply requirement 7.5V DC nominal
Current drain
  TX High
  RX Max. auidio/ Sandby
F3360DT/DS
  1.5A
  550mA / 140mA
F4360DT/DS
  1.8A
  550mA / 140mA
Antenna impedance 50Ω
Operating temperature range -30°C to 60°C; –22°F to +140°F (radio specifications)
Dimensions (W×H×D)
(Projections not included)
53.5×142.7×39.5 mm; 2.11×5.62×1.56 in (With BP-232WP)
Weight 400g; 14.1oz (With BP-232WP, MB-94R & FA-SC57U)
Transmitter
Output power 5W, 1W (Hi, Low)
Max. frequency deviation ±2.5kHz (Narrow)
Frequency stability ±1.0ppm
Spurious emissions 75dB typ.
FM hum and noise
F3360DT/DS
  50dB typ. (Narrow)
F4360DT/DS
  45dB typ. (Narrow)
AAudio harmonic distortion 1.5% typ. (AF 1kHz 40% deviation)
FSK error 1% typ. (Digital 6.25/12.5kHz)
Ext. microphone connector 14-pin multi-connector/2.2kΩ
Receiver
Sensitivity
   Analog
   Digitlal

0.24μV typ. (at 12dB SINAD)
–8.0dBμV emf typ. (at 5% BER)
Adjacent channel selectivity 68/67/59dB typ. (Narrow/D 12.5kHz/D 6.25kHz)
Spurious response 80dB min.
Intermodulation 75/70/70dB typ. (Narrow/D 12.5kHz/D 6.25kHz)
Hum and noise
F3360DT/DS
  50dB typ. (Narrow)
F4360DT/DS
 48dB typ. (Narrow)
Ext. speaker connector 14-pin multi-connector/8Ω
Audio output power (at 5% distortion) 800mW typ. (Internal SP, 12Ω load)
1000mW typ. (External SP, 8Ω load)

Measurements made in accordance with TIA-603, EN 301-166 and EN 300-113. All stated
specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications & IP Rating

Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.

Standard MIL 810 G
Method Proc
Low Pressure 500.5 I, II
High Temp. 501.5 I, II
Low Temp. 502.5 I, II
Temp. Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standard (F3360D/F4360D, BP-232WP and HM-184)
Dust & Water IP67 (Dust-tight and waterproof protection)

 

View our blog