| General |
|
Frequency Coverage |
IC-F3261DT/DS: 136-147MHz
IC-F4261DT/DS: 350-400MHz, 400-470MHz, 450-512MHz |
|
Number of channels |
512 channels / 128 zones |
|
Type of emission |
11K0F3E / 4K00F1E / F1D |
|
Channel spacing |
12.5 / 6.25kHz |
|
Power supply requirement |
7.5VDC
nominal |
Current drain (approx.)
Tx High
Rx Max. audio/Standby |
IC-F3261DT / DS
1.5A (at 5W)
600mA / 150mA
IC-F4261DT / DS
1.8A (at 5W)
600mA / 140mA
|
|
Antenna impedance |
50Ω |
|
Operating temperature range |
–30°C to +60°C
–22°F to +140°F |
Dimensions (with BP-232N)
(projections are not included) |
54
(W) ×142.7 (H) ×39.5 (D) mm;
2.13x5.62x1.56in.
(With BP-232WP) |
|
Weight (approx.) |
370g;
13.1oz (with BP-232WP)
|
|
Transmitter |
|
Output power |
5W, 2W, 1W, (Hi, L2, L1) |
|
Max. frequency deviation |
±2.5 kHz |
|
Frequency stability |
±1.0ppm |
|
Spurious emissions |
75dB min. |
|
FM Hum and Noise |
40dB typ. |
|
Audio harmonic distortion |
3% typ. (AF 1kHz 40% deviation) |
|
FSK error |
5% max. |
|
External microphone connector |
2.2kΩ (14-pin multi-connector) |
|
Receiver |
|
Sensitivity |
Analog:
0.25μV typ. (at 12dB SINAD)
Digital:
0.20μV typ. (at 5% BER) |
|
Adjacent channel selectivity |
68dB typ. |
|
Spurious response
rejection |
70dB min. |
|
Intermodulation
rejection |
74dB typ. |
|
Hum and noise ratio |
40db typ.
|
|
Audio output power |
800mW typ.
(at 5% distortion with an 8Ω load) |
|
External speaker connector |
14-pin multi-connector/8Ω |
Measurements made in accordance with EIA/TIA-603.
Ingress Protection Standard: Dust and water – IP67 (dust-protection and water resistant)
All stated specifications are subject to change without notice or obligation.
All trademarks are the properties of their respective holders