|
General |
|
Frequency coverage
|
F3201DEX
136–174MHz |
F4201DEX
400–470MHz |
|
|
Number of channels |
16 channels |
|
Type of emission |
11K0F3E, 8K50F3E, 4K00F1E/F1D |
|
Channel spacing |
12.5 / 6.25 kHz |
|
Power supply requirement |
7.4V DC nominal |
Current drain
Tx High (VHF)
Rx Max. audio/standby |
F3201DEX
550mA
300mA (Internal SP)/110mA |
F4201DEX
550mA
300mA (Internal SP)/110mA |
|
|
Antenna impedance |
5OΩ |
|
Operating temperature range |
|
–20°C to +55°C; –4°F to +131°F |
|
|
Dimensions (proj. not included) |
63×144×50 mm; 2.48×5.67×1.97 in (With BP-277EX) |
|
Weight
|
F3201DEX
258g; 9.1 oz (Radio only)
466g; 1.03 lb (With MB-94EX,
BP-277EX & FA-SC55V) |
F4201DEX
250g; 8.8 oz (Radio only)
460g; 1.01 lb (With MB-94EX,
BP-277EX & FA-SC57U) |
|
|
Transmitter |
|
Output power (at 7.4V DC) |
1W, 0.8W, 0.6W (Hi, L2, L1) |
|
Max. permissible deviation |
±2.5kHz (Narrow) |
|
Frequency stability |
|
|
Spurious emissions |
66dB min. |
FM harmonic distortion
|
F3201DEX
46dB typ. (Narrow) |
F4201DEX
40dB typ. (Narrow) |
|
Audio harmonic distortion
|
1.5% typ. (Narrow @ AF 1kHz 40% deviation)
|
FSK Error
|
F3201DEX
2.0% typ. (Digital) |
F4201DEX
1.5% typ. (Digital) |
|
|
External microphone connector |
14-pin multi-connector/2.2kΩ |
|
Receiver |
Sensitivity
Analog
(at 12dB SINAD)
Digital
(at 5% BER) |
F3201DEX
0.24μV typ.
–8dBμV emf typ. |
F4201DEX
0.22μV typ.
–9dBμV emf typ. |
|
|
Adjacent channel selectivity |
F3201DEX
70/62dB typ. (Narrow/Digital) |
F4201DEX
66/57dB typ. (Narrow/Digital) |
|
|
Spurious response |
F3201DEX
85dB typ. (Narrow),
87dBμV emf typ. (Digital) |
F4201DEX
75dB typ. (Narrow),
79dBμV emf typ. (Digital) |
|
|
Intermodulation |
F3201DEX
75/67dB typ. (Narrow/Digital) |
F4201DEX
74/73dB typ. (Narrow/Digital) |
|
|
Hum and noise |
F3201DEX
43dB typ. (Narrow) |
F4201DEX
37dB typ. (Narrow) |
|
|
Audio output power |
400mW typ. (at 5% distortion with 32Ω load) |
|
External speaker connector |
14-pin multi-connector/32Ω |
Measurements made in accordance with TIA-603, EN 300-086, EN 301-166.All stated specifications are subject to change without notice or obligation.
Also meets equivalent MIL-STD-810-C, -D, -E and -F.