Icom America Home

IC-F30G / F40G

VHF / UHF transceiver

specifications

Specifications

General
Frequency range
   IC-F30GT-L/GS-L
   IC-F30GT/GS
   IC-F40GT/GS
 
66-88MHz
136-174MHz
400-430Mhz
440-480MHz
450-490MHz (U.S.A.)
480-512MHz (U.S.A.)

480-520MHz (Others)

Number of channels Max. 256 Ch / 16 banks
Channel spacing
   IC-F30GT-L/GS-L
   IC-F30GT/GS
 
   IC-F40GT/GS

 
25kHz/12.5kHz
25/30kHz/12.5/15kHz
20kHz/12.5kHz
25kHz/12.5kHz
20kHz/12.5kHz

Antenna impedance 50Ω
Frequency error
IC-F30GT-L/GS-L
±2.5ppm (EIA), ±1.5kHz (ETS)
±10ppm (EIA), ±1.0kHz (ETS)
PLL channel step*
IC-F30GT-L/GS-L
2.5kHz, 3.125kHz, 5kHz, 6.25kHz, 7.5kHz
5kHz, 6.25kHz
*Depending on version
Power supply requirement 7.2V DC
Current drain (at 7.2V DC; approx.):
  IC-F30GT-L/GS-L IC-F30GT/GS IC-F40GT/GS
Transmit High 2.0A 1.75A typ. 1.7A typ.
Receive AF max. 300mA 300mA 300mA
stand-by 90mA 95mA 95mA
Operating temp. range

-30°C to +60°C;-22°F to +140°F (EIA)
-25°C to +55°C (ETS)

Dimensions
(Projections not included)
54(W) × 139(H) × 38(D) mm;
21/8(W) × 515/32(H) × 11/2(D) in
Weight (with BP-210)
420g; 14.8 oz
Transmitter
Modulation system Variable reactance frequency modulation
Output power (nominal) 5.0W (IC-F30GT-L/GS-L)
5.0W (IC-F30GT/GS)
4.0W (IC-F40GT/GS)
Max. freq. deviation ± 2.5kHz, ± 5kHz, ± 4kHz
Modulation limiting 60-100%
Spurious emissions –73dB (EIA)
Less than 0.25μW (ETS)
Adjacent Ch. power 60dB (ETS; 12.5 kHz)
70dB (ETS; 25/20 kHz)
Residual modulation
IC-F30GT-L/GS-L
43dB⁄45 dB typ. (ETS; 12.5kHz⁄25/20kHz)
50dB⁄50 dB typ. (ETS; 12.5kHz⁄25kHz)
External MIC connector 9-pin multi conductor / 2.2kΩ
Receiver
Sensitivity 0.25μV typ. (at 12dB SINAD)
0.63μV typ. (at 20dB SINAD; emf)
Squelch sensitivity 0.25µV typ. (at threshold)
Adjacent channel selectivity 63dB typ. (ETS; 12.5kHz)
73dB typ. (ETS; 25kHz)
Spurious response 70dB (EIA, ETS)
Intermodulation 74dB typ. (EIA)
70dB typ. (ETS)
Hum and noise ratio
 
IC-F30GT-L/GS-L
40dB⁄43dB typ. (EIA; 12.5kHz⁄25/20kHz)
43dB⁄45dB typ. (ETS; 12.5kHz⁄25/20kHz)
48dB⁄54dB typ. (EIA; 12.5kHz⁄25kHz)
50dB⁄55dB typ. (ETS; 12.5kHz⁄25kHz)
Audio output power 0.5W typ. at 5% distortion with an 8Ω load
External SP connector 9-pin multi conductor / 8Ω

Applicable U.S. Military Specifications

Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.

Standard

MIL 810C MIL 810D MIL 810E MIL 810F
Method Proc. Method Proc. Method Proc. Method Proc.
Low Pressure 500.1 I 500.2 I, II 500.3 I, II 500.4 I, II
High Temp. 501.1 I 501.2 I, II 501.3 I ,II 501.4 I, II
Low Temp. 502.1 I 502.2 I, II 502.3 I, II 502.4-3 I, II
Temp. Shock 503.1 I 503.2 I 503.3 I 503.4 I
Solar Radiation 505.1 I 505.2 I 505.3 I 505.4 I
Rain 506.1 II 506.2 II 506.3 II 506.4 III
Humidity 507.1 I, II 507.2 II, III 507.3 II, III 507.4
Salt Fog 509.1 I 509.2 I 509.3 I 509.4
Dust 510.1 I 510.2 I 510.3 I 510.4 I
Vibration 514.2 VII, X 514.3 I 514.4 I 514.4 I
Shock 516.2 I, II, IV 516.3 I, IV 516.4 I, IV 516.5 I, IV

Measurements made in accordance with EIA-152C/204D, TIA-603 or ETS 300-086. All stated specifications are typical and subject to change without notice or obligation.

Intrinsically Safe Type Approval

There are versions that conform to intrinsically safe rating of the FMRC (Factory Mutual Research Corporation). Ask your dealer for details.

Intrinsically safe Class Ι, ΙΙ and ΙΙΙ, Division 1, Groups C, D, E, F, and G ; Nonicendive Class Ι, Division 2, Groups A, B, C and D hazardous locations when used with Icom BP-210FM battery pack “Max. Temp. T3C at 60°C”

Supplied accessories

  • VHF Antenna*
  • UHF Antenna*
  • Belt clip
  • Battery pack, BP-210

* Antenna may differ according to version

Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S.A. and other countries. SmarTrunk II is a trademark of the SmarTrunk System Inc. LTR is a registered trademark of the E.F.Johnson Company.