English | Español | Português
Icom America Home

IC-F3011 Series

VHF and UHF Transceivers

specifications

Specifications

General

Frequency coverage

IC-F3011  136-174 MHz

IC-F4011   400-470 MHz 450-512 MHz

Number of channels 16 channels
Channel spacing 12.5 KHz, 15/30 kHz
PLL channel step 2.5 kHz, 3.125 kHz (VHF)
5 kHz, 6.25 kHz (UHF)
Power supply requirement 7.2V DC
Antenna impedance 50OΩ
Operating temperature range
-30°C to +60°C; -22°F to +140°F
Current drain
  Tx High (VHF)
       High (UHF)
  Rx Max. audio
       Standby

1.5A
1.6A
300mA
70mA
Dimensions (proj. not included) 53(W) × 120(H) × 38(D) mm
Weight 300g; 10.6oz (with BP-232H)
Transmitter
FM Hum and noise 46/40dB typ. (W/N)
Output power (at 7.2V DC) 5W (VHF), 4W (UHF)
Adjacent channel power
VHF   
UHF 
80/70dB typ.
75/68dB typ.
Max. frequency deviation ±5.0 kHz (at 25 kHz)
±2.5 kHz (at 12.5 kHz)
Frequency stability
±2.5ppm
Spurious emissions 80dBc typ.
Adjacent channel selectivity 75/65dB typ. (W/N)
Receiver
Sensitivity 0.25 µV (typ.) at 12 dB SINAD
Intermodulation rejection 74dB typ.
Squelch sensitivity 0.25μV typ. (at threshold)
Spurious response rejection 70 dB (typ.)
Hum and noise
VHF
UHF
50/45dB typ. (W/N)
45/40dB typ. (W/N)
Audio output power (at 7.2V DC) 500mW (typical at 5% distortion with an 8Ω load)
External speaker connector 2-conductor 3.5 (d) mm (18")⁄8Ω

Measurements made in accordance with EAIA-152-C/204D or TIA-603.

Applicable U.S. Military Specifications and IP Rating

Standard MIL 810 F
Method Proc
Low Pressure 500.4 I, II
High Temp. 501.4 I, II
Low Temp. 502.4-3 I, II
Temp. Shock 503.4 I
Solar Radiation 505.4 I
Rain 506.4 I, II
Humidity 507.4
Salt Fog 509.4
Dust Blowing 510.4 I
Vibration 514.5 I
Shock 516.5 I, V

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • Battery pack:BP-232N
  • Antenna
  • Belt clip: MB-94
  • Battery charger*, AC adapter*
* Depending on version