English | Español | Português
Icom America - 2 way radios

F1000D / F2000D

IDAS™ VHF/UHF Digital & Analog Portable Two-Way Radios

Specifications

Specifications

General
Frequency coverage (MHz)
F1000D
136–174MHz

  F2000D
400-470MHz
450-512MHz
Number of channels
F1000D
16 channels
F2000D 
16 channels
Type of emissions
F1000D
16K0F3E, 11K0F3E,
8K50F3E, 4K00F1E/D
  F2000D
16K0F3E, 11K0F3E, 4K00F1E/D
Channel spacing
F1000D
30KHz, 15KHz, 6.25KHz
25KHz, 12.5KHz, 6.25KHz
  F2000D
25KHz, 12.5KHz, 6.25KHz
Power supply requirement 7.5V DC nominal
Current drain
  TX High
  RX Max. auidio/ Sandby
F1000D
1.3A
400mA (Internals SP) / 110mA
F2000D
1.4A
400mA (Internal SP) / 110mA
Antenna impedance 50Ω
Operating temperature range -30°C to 60°C; –22°F to +140°F (radio specifications)
Dimensions (W×H×D)
(Projections not included)
52.2×111.8×30.3 mm; 2.06×4.4×1.19 in (With BP-280)
Weight 260g; 9.17oz (With MB-133 and BP-280)
Transmitter
Output power
F1000D
5W, 2W, 1W (Hi, L2, L1)
  F2000D
4W, 2W, 1W (Hi, L2, L1)
Max. frequency deviation ± 5.0kHz/±2.5kHz (Wide/Narrow)
Frequency stability ±1.0ppm
Spurious emissions 70dB min.
FM hum and noise
IF1000D
46/40dB typ. (Wide/Narrow)
  F2000D
50/44dB typ. (W/N)
Audio harmonic distortion
F1000D
2.0%/1.1% typ. (W/N)
((AF 1kHz 40% deviation)
  F2000D
1.0%/1.5% typ. (W/N)
(AF 1kHz 40% deviation)
FSK error 5.0% max.
Ext. microphone connector 3-conductor 2.5 (d) mm (1⁄10")⁄2.2kΩ
Receiver
Sensitivity
  (at 12dB SINAD)
  (at 5% BER)
F1000D
0.21μV typ. (Analog)(W/N)
––8dBμV emf typ. (Digital)
  F2000D
0.24μV typ. (Analog)(W/N)
–8dBμV emf typ. (Digital)
Adjacent channel selectivity
F1000D
777/69/59dB typ. (W/N/D)
  F2000D
75/69/58dB typ. (W/N/D)
Spurious response 80dB min.
Intermodulation
F1000D
775/75/71dB typ. (W/N/D)
  F2000D 
75/75/70dB typ. (W/N/D)
Hum and noise
F1000D
447/43dB typ. (W/N)
  F2000D
47/42dB typ. (W/N)
Ext. speaker connector 2-conductor 3.5 (d) mm (1⁄8″)/8Ω
Audio output power (at 5% distortion)
   Internal SP (w/12Ω load)
   External SP (w/8Ω load)

800mW typ. (at 5% distortion)
400mW typ. (at 5% distortion)

Measurements made in accordance with TIA-603.
All stated specifications are subject to change without notice or obligation.
* 25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.
Ask your dealer if you need 25kHz bandwidth.

Applicable U.S. Military Specifications

Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.

Standard MIL 810 F
Method Proc
Low Pressure 500.5 I, II
High Temp. 501.5 I, II
Low Temp. 502.5 I, II
Temp. Shock 503.5 I
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5
Salt Fog 509.5
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standard
Dust & Water IP67 (Dust-tight and waterproof protection)

 

View our blog