English | Español | Português
Icom America - 2 way radios

F1000 / F2000

Entry & Mid Level Analog Portables VHF/UHF

Specifications

Specifications

General

Frequency coverage (MHz)

F1000/S/T
136–174MHz
F2000/S/T 
400-470MHz
450-512MHz
Number of channels
F1000
 16 channels
F1000S/T
 128
F2000
 16 channels
F2000S/T
 128
Type of emissions 16K0F3E*/11K0F3E
Channel spacing 12.5/25kHz (Not USA Version)
Power supply requirement 7.5V DC nominal
Current drain
  TX High
  RX Max. auidio/ Sandby
F1000/S/T
  1.3A
  330mA (Internals SP) / 77mA
F2000/S/T
  1.3A
  300mA (Internal SP) / 80mA
Antenna impedance 50Ω
Operating temperature range -30°C to 60°C; –22°F to +140°F (radio only)
Dimensions (W×H×D)
(Projections not included)
52.2×111.5×24.5mm; 2.06×4.39×0.96 in (With BP-279)
Weight 240g; 8.47oz (With BP-279)
Transmitter
Output power
F1000/S/T
  5W, 2W, 1W (Hi, L2, L1)
F2000/S/T 
  4W, 2W, 1W (Hi, L2, L1)
Max. frequency deviation ± 5.0kHz/±2.5kHz (Wide/Narrow)
Frequency stability ±2.5ppm
Spurious emissions 70dB min.
FM hum and noise 46/40dB typ. (Wide/Narrow)
Audio harmonic distortion 1.0%/1.5% typ. (W/N, AF 1kHz 40% deviation)
Ext. microphone connector 2-conductor 3.5 (d) mm (1⁄10")⁄2.2kΩ
Receiver
Sensitivity (at 12dB SINAD) 0.25μV typ.
Adjacent channel selectivity
F1000/S/T
  76/53dB typ. (W/N)
F2000/S/T 
  73/56dB typ. (W/N)
Spurious response 70dB min.
Intermodulation
F1000/S/T
  74dB typ.
F2000/S/T 
  73dB typ.
Hum and noise
F1000/S/T
  51/45dB typ. (W/N)
F2000/S/T 
  49/43dB typ. (W/N)
Ext. speaker connector 2-conductor 3.5 (d) mm (1⁄8")/8Ω
Audio output power (at 5% distortion)
   Internal SP (w/12Ω load)
   External SP (w/8Ω load)

800mW typ. (at 5% distortion)
400mW typ. (at 5% distortion)

Measurements made in accordance with TIA-603.
All stated specifications are subject to change without notice or obligation.
* 25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.
Ask your dealer if you need 25kHz bandwidth.

Applicable U.S. Military Specifications

Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.

Standard MIL 810 G
Method Proc
Low Pressure 500.5 I, II
High Temp. 501.5 I, II
Low Temp. 502.5 I, II
Temp. Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standard
Dust & Water IP67 (Dust-tight and waterproof protection)

Supplied accessories

  • Battery pack, BP-279
  • Belt clip, MB-133
  • Antenna FA-SC57U or FA-SC55V
View our blog