English | Español | Português
Icom America Home

IC-FR9010 / FR9020

Series

specifications

Specifications

General

Frequency coverage

IC-FR9010  146–174MHz

IC-FR9020  440–475MHz

Number of channels Max. 500 channels
Channel spacing 12.5/20/25/30kHz*
Type of emission 16K0F3E*, 11K0F3E, 8K10F1E/F1D
Frequency Stability

IC-FR9010  ±2.5ppm (W/N), ±1.5ppm (Digital)

±1.5ppm (W/N), ±1.5ppm (Digital)

Antenna impedance 50Ω (Type-N)
Operating temperature range -30°C to 60°C; –22°F to +140°F
Power supply voltage 13.6V DC nominal
Current drain
TX


RX   
IC-FR9010
16A (High)

3A/280mA (Max. audio/Stand-by)    
IC-FR9020
18A (High)

3A/280mA (Max. audio/Stand-by)
Dimensions (W×H×D) 482×88×413 mm ; 18.98×3.46×16.26 in
Weight 11.0kg ; 24.3lb (approximately)
Transmitter
Output power

IC-FR9010  110W/50W (High/Low) 100% duty cycle

IC-FR9020  100W/50W (High/Low) 100% duty cycle

Max. frequency deviation ±5.0 kHz/±2.5 kHz (wide/narrow)
Spurious emissions

IC-FR9010  80dB min.

IC-FR9020  76dB min.

FM hum and noise 55/50dB min. (W/N)
Audio harmonic distortion 3% typ. (60% deviation)
Frequency stability ±2.5ppm
Micorophone impedance 600Ω (8-pin modular)
Receiver
Sensitivity 12 dB SINAD  0.30μV typ.
5% BER         0.30μV typ.
Adjacent channel selectivity

IC-FR9010  82/76dB min. (W/N)  55dB min. (Digital)

IC-FR9020  80/72dB min. (W/N)  55dB min. (Digital)

Spurious response rejection

IC-FR9010  95dB min. (W/N)  83dB min. (Digital)

IC-FR9020  85dB min. (W/N)  83dB min. (Digital)

Intermodulation rejection

IC-FR9010  79dB min. (W/N)  79dB min. (Digital)

IC-FR9020  77dB min. (W/N)  77dB min. (Digital)

Hum and noise 48dB min. (W/N)
Audio output power (at 5% distortion) 7.5W typ. at 5% distortion with 8Ω load

Measurements made in accordance with EIA/TIA-603 (for FM) and TIA-102 (for Digital). All stated specifi cations are subject to change without notice or obligation.
*25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. 25kHz repeaters require a waiver from the FCC.

Applicable U.S. Military Specifications

Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.

Standard MIL 810 G
Method Proc
High Temp. 501.5 I, II
Low Temp. 502.5 I, II
Vibration 514.6 I
Shock 516.6 I

Also meets equivalent MIL-STD-810-C, -D, -E and -F

Supplied Accessories

DC power cable connector