English | Español | Português
Icom America Home

IC-F8100

HF Transceiver

specifications

Specifications

General

Frequency coverage

Receive

Transmit

 
0.5-29.9999MHz
1.6-29.9999MHz
Type of emission J3E, A3E, A1A, F1B
Number of channels 500 channels
Operating temperature -30°C to +60°C; -22°F to +140°F
Frequency stability ±0.3ppm (at -30°C to +60°C)
Power supply requirement 13.8V DC (11.73-15.87V) (Negative ground)
Antenna impedance 50Ω (SO-239)

Current drain

Receive (Max. audio)

Transmit (Max. output)

 
Less than 3A
Less than 28A
Dimensions (W × H × D) 174 × 62 × 259 mm; 6.85 × 2.44 × 10.2 in
(IC-F8100 #01)
Weight (approx.) 3.8kg; 8.38lb (IC-F8100 #01)
Transmitter
Output power J3E/A1A
A3E
F1B
125, 50, 10W PEP (typical)
30, 12.5, 3W (typical)
75, 50, 10W PEP (typical)
Spurious emissions 64dB typ. below PEP
Carrier suppression 50dB below PEP
Unwanted sideband  400Hz
1KHz
55dB below PEP
65dB below PEP
3rd IMD 25dB below PEP

Duty cycle

Normal conversation

Data mode

All modes with CFU-F8100


100% (at -30°C to +60°C)
25% (at -30°C to +30°C)
100% (at -30°C to +45°C)
*Max. 5 minutes continuous transmission.


Receiver

Sensitivity (at 10dB S/N)

J3E (Pre-amp. ON)

A3E

0.5-1.5999MHz

14dBµV

22dBµV

16-29.9999MHz

-14dBµV

6dBµV

Squelch Sensitivity
J3E (Pre-amp. ON)
A3E (at 1.000MHz)

Threshold

Less than +20dBµV

Less than +30dBµV

Tight

Less than +90dBµV

Less than +110dBµV

Selectivity

J3E

A3E

 

2.4kHz/-6dB

6kHz/-6dB

 

3.8kHz/-60dB

15kHz/-60dB

Spurious responses

More than 70dB

Audio output power
(at 13.8V DC)

4.0W at 10% distortion with a 4Ω load

Clarifire

±200Hz

All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications

Tested to IC-F8100 (#01-03), AD-119, CFU-F8100 and MB-126

Standard MIL 810 G
Method Procedure
Low Pressure 500.5 I, II
High Tempurature 501.5 I, II
Low Tempurature 502.5 I, II
Tempurature Shock 503.5 I-B
Solar Radiation 505.5 I
Rain 506.5 I,III
Humidity 507.5 II
Salt Fog 509.5
Dust 510.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D and -E and -F

Tested to IC-F8100 (#01-03), AD-119 and CFU-F8100.

Ingress Protection Standard
Dust & Water IP54 (Dust-protection and water resistant)

 

View our blog