English | Español | Português
Icom America Home

IC-FR5000 Series

VHF and UHF Repeaters

specifications

Specifications

General
Frequency coverage 136-174 MHz
400-470 MHz, 450-520 MHz
Number of channels Max. 32 channels
Channel spacing 6.25/12.5/25 kHz
7.5/15.0/30 kHz
PLL channel step 2.5, 3.125 kHz
Frequency stability ±0.5ppm
Operating temperature range -30°C to +60°C
-22°F to +140°F
Power supply voltage 13.6V DC

Current drain (at 13.6 V DC)
Tx
Rx

 
50W
Max. audio
Stand-by
 

 
15A
1.9A
500mA
400mA (FAN, LCD backlight off)

Antenna impedance 50Ω (Type-N × 2)
Dimensions (W×H×D) 483 × 88 × 260 mm
19132 × 31532 × 1014 in
Weight 5.6 kg; 12.3lb (approx.)
Transmitter
Output power 50W (adjustable to 5W)
25W at 100% duty cycle
Max. frequency deviation ±5.0 kHz/±2.5 kHz (wide/narrow)
Spurious emissions 80dB typ.
Adjacent channel power 73/67dB typ. (wide/narrow)
FM Hum and noise 50/45dB typ. (wide/narrow)
Audio harmonic distortion 1% typ. (40% deviation)
Microphone impedance  600Ω (8-pin modular)
Receiver
Sensitivity
FM (W/N)
Digital

0.30µV typ. (at 12dB SINAD)
0.25µV typ. (at 5% BER)
Spurious response 90dB
Intermodulation rejection ratio 78dB
Hum and noise ratio 50/45dB (wide/narrow)
Audio output power 4.0 W typ. at 5% distortion with a 4 ohm load
External speaker connector  2-conductor 3.5 (d) mm (18″)/4Ω

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and pased the following MIL-STD requirements and strict environmental standards.

Standard MIL 810F
Method Proc.
High Temperature 501.4 I, II
Low Temperature 502.4-3 I, II
Dust 510.4 I
Vibration 514.4 I
Shock 516.5 I

Also meets equivalent MIL-STD-810-C, -D and -E.

Measurements made in accordance with TIA-603 (for Analog FM). All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • DC power cable
  • Handle kits
  • Key assign stickers

Rear View

Rear View

View our blog