English | Español | Português
Icom America - 2 way radios

F5360D / F6360D

VHF and UHF Digital Transceiver

Specifications

Specifications

General
Frequency coverage
F5360D
136–174MHz
F6360D
400–470MHz
Number of channels 512 channels/128 zones
Type of emissions 8K50F3E, 8K30F1E/F1D, 4K00F1E/F1D
Channel spacing 8K50F3E, 8K30F1E/F1D, 4K00F1E/F1D
Power supply requirement 13.6V DC
Current drain
  TX High
  RX Max. auidio/ Sandby
F5360D
  10A (50W)
  0.9A/250mA
F6360D
  10A (45W)
  0.9A/250mA
Antenna impedance 50Ω (SO-239)
Operating temperature range –30°C to +60°C ; –22°F to +140°F
Dimensions (W×H×D)
(Projections not included)
160×45×150mm; 6.3×1.77×5.91in
Weight 1.3kg; 2.87lb
Transmitter
Output power
(at 13.6V DC)
F5360D
50W, 25W, 5W (Hi, L2, L1)
F6360D
45W, 25W, 4.5W (Hi, L2, L1)
Max. frequency deviation ±2.5kHz (Narrow)
Frequency stability ±1.0ppm
Spurious emissions
F5360D
  87dB typ.
F6360D
  80dB typ.
FM hum and noise
F5360D
  45dB typ. (Narrow)
F6360D
  45dB typ. (Narrow)
Audio harmonic distortion 1% typ. (AF 1kHz 40% deviation)
FSK error 1% typ. (Digital 6.25/12.5kHz)
Ext. microphone connector 600Ω (8-pin modular)
Receiver
Sensitivity
(at 12dB SINAD)
(Digital 5% BER)

0.25μV typ.
–9dBμV emf typ.
Adjacent channel selectivity 70/70/59dB typ. (Narrow/D 12.5kHz/D 6.25kHz)
Spurious response 80dB typ.
Intermodulation rejection 75/70/70dB typ. (Narrow/D 12.5kHz/D 6.25kHz)
Hum and noise 40dB typ. (Narrow)
Ext. speaker connector 2-conductor 3.5 (d) mm (1⁄8ʺ)/4Ω
Audio output power (at 5% distortion) 4W typ. (at 5% distortion, 4Ω load)

Measurements made in accordance with TIA-603, EN 301-166 and EN 300-113.
All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications

Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.

Standard MIL 810G
Method Procedure
Low Pressure 500.5 I, II
High Temp. 501.5 I, II
Low Temp. 502.5 I, II
Temp. Shock 503.5 I-C
Solar Radiation 505.5 I
Humidity 507.5 II
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

 

View our blog