English | Español | Português
Icom America - 2 way radios

F5122DD / F6122DD

VHF and UHF Data Transceivers

Specifications

Specifications

General

Frequency coverage

IC-F5122DD
136–174MHz
IC-F6122DD
400–470MHz
Number of channels 128 channels

Type of emission

8K30F1D, 4K00F1D (4FSK)

Channel spacing

12.5/6.25kHz

Over-the-air data rate 9600/4800bps
Power supply requirement 13.6V DC
Current drain (approx.)
Tx High (25W)
Rx Standby

6A
400mA
Antenna impedance 50Ω (BNC)
Operating temperature range

–30°C to 􀊴60°C ; –22°F to +60°F

Dimensions (W×H×D)
(Projections not included)

150×40×134.7mm;
5.91×1.57×5.3 in

Weight (approx.) 900g; 2.0lb
Ethernet interface
(Depending on version)
10BASE-T (Full/Half-duplex), 100BASE-TX (Half-duplex)
with Auto-negotiation function
RS-232 connection rate 1200, 2400, 4800, 9600, 19200, 38400 baud
Transmitter
Output power (at 13.6V DC)

25W, 10W, 2.5W (Hi, L2, L1)

Spurious emissions 70dB min.
FSK error 2.5% typ. (DN/DVN)
Frequency stability ±1.0ppm
Receiver
Sensitivity (at 1% BER) –4dBμV/–5dBμV emf typ. (DN/DVN)
Adjacent channel selectivity 64dB/60dB typ. (DN/DVN)
Spurious response 76dB/70dB typ. (DN/DVN)
Intermodulation 68dB/66dB typ. (DN/DVN)

Dimensions

IC-F5122D Dimensions

Applicable U.S. Military Specifications

Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.

Standard MIL 810 G
Method Proc
Low Pressure 500.5 I, II
High Temp. 501.5 I, II
Low Temp. 502.5 I, II
Temp. Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

 

View our blog