IC-A24

IC-A6

IC-A14

IC-A14S

IC-A24 / IC-A6

VHF Air Band Transceiver

specifications

IC-A24 / IC-A6

authorized dealers

product brochure - .PDF
instruction manual - .PDF

all downloads

Specifications

General
Frequency Coverage Tx Rx Weather	118.000-136.975 MHz 108.000-117.975 MHz 161.650-163.275 MHz
Mode WX	AM (6K00A3E) FM (16K0G3E)
Channel spacing	25 kHz
No. of memory channels	200 (20 Channels X 10 banks)
Power supply requirement	7.4/7.2V DC (Battery pack) 11.0V DC (External DC jack)
Current drain (at 7.2 V DC) Tx Rx Max. audio Rx Stand-by	1.5 A typical 300 mA typical 70 mA typical
Frequency stability	±5 ppm
Operating Temperature Range	-10°C to +60°C; -14°F to +140°F
Dimensions (W×H×D) (projections not included)	54(W) x 129.3(H) x 35.5(D) mm; 2¹/₈(W) ×5³/₃₂(H) × 1¹³/₃₂(D) in
Weight	430 g; 15.2 oz (with antenna and BP-210N)
Antenna connector	50Ω BNC type

Transmitter
Output power (at 7.2 V DC)	5.0 W typ. (PEP) 1.5 W typ. (CW)
Modulation system	Low level modulation
Modulation limiting	70-100%
AF harmonic distortion	Less than 10% (at 60% mod.)
Hum and noise ratio	More than 35 dB
Spurious emissions	More than 46dB (Except operating freq. ±62.5kHz point)
Microphone impedance	3-conductor 2.5 (d) mm (¹/₁₀″) / more than 100kΩ

Receiver
Intermediate frequency 1st 2nd	30.05 MHz 450 kHz
Sensitivity (typ) VOR (AM 6dB S/N) COM (AM 6dB S/N) WX (FM 12dB SINAD)	Less than 0.71 µV Less than 0.5 µV Less than 0.22 µV
Selectivity	More than 7.5 kHz/-6 dB Less than 25 kHz/-60 dB
Hum and noise ratio	More than 40 dB
Spurious response AM FM	More than 60 dB More than 30 dB
Audio output power	More than 500mW typ. with an 8Ω load, 30% modulation
Ext. speaker connector	3-conductor 3.5 (d) mm, (¹⁄₈″) / 8Ω

All specifications are subject to change without notice or obligation.

Supplied Accessories

Battery pack, BP-210N or battery case, BP-208N*
Belt clip, MB-103
Carrying case, LC-159*
Wall charger, BC-110AR/DR*
Headset adapter, OPC-499*
Antenna, FA-B02AR
Handstrap

* Depending on version