|
General |
|
Frequency coverage*1
Receive
Transmit
|
(unit: MHz)
0.030– 60.000*2
108.000–174.000*2
1.800– 1.999
3.500– 3.999
7.000– 7.300
10.100– 10.150
14.000– 14.350
18.068– 18.168
21.000– 21.450
24.890– 24.990
28.000– 29.700
50.000– 54.000
144.000–148.000
*1 Frequency coverage is depending on version.
*2 Some frequency ranges are not guaranteed.
|
|
Mode |
USB, LSB, CW, RTTY, AM, FM |
|
Number of memory Ch. |
102 (99 regular, 2 scan edges and 1 call) |
|
Antenna connector |
SO-239×3
(2 for HF/50MHz and 1 for 144MHz bands; 50Ω)
|
|
Temperature range |
–10°C to +60°C;
+14°F to +140°F
|
|
Frequency stability |
Less than ±7ppm from 1 min. to 60 min. after power ON. After that, rate of
stability change is less than ±1ppm at 25°C (+77°F). Temperature
fluctuations (0°C to +50°C; +32°F to +122°F) less than ±5ppm. |
|
Frequency resolution |
1Hz |
|
Power supply requirement |
13.8V DC ±15% |
|
Power consumption |
|
Tx |
Max. power |
23A |
|
Rx |
Standby |
2.2A |
|
|
Max. audio |
3.0A |
|
|
Dimensions
(projections not included)
|
287(W)×120(H)×316.5(D) mm;
115⁄16(W)×423⁄32(H)×1215⁄32(D)
in
|
|
Weight (approx.) |
9.0kg; 19lb 13oz |
|
ACC 1 connector |
8-pin DIN connector |
|
ACC 2 connector |
7-pin DIN connector |
|
CI-V connector |
2-conductor 3.5 (d) mm (1⁄8″)
|
|
DATA connector |
Mini DIN 6-pin |
|
Receiver |
|
Receive system |
Triple conversion superheterodyne system |
|
Intermediate frequencies |
1st 64.455MHz
2nd 455kHz
3rd 36kHz
|
|
Sensitivity (typical): |
|
Frequency
Range (MHz)
|
SSB, CW, RTTY
(at 2.4kHz BW)
|
AM
(at 6kHz BW)
|
FM
(at 15kHz BW)
|
|
0.50–1.799 |
— |
13μV |
— |
|
1.80–27.99 |
0.16μV*1 |
2μV*1 |
— |
|
28.0–29.99 |
0.16μV*1 |
2μV*1 |
0.5μV*1 |
|
50.0 –54.0 |
0.13μV*3 |
1μV*2 |
0.25μV*2 |
|
144.0–148.0 |
0.11μV*3 |
1μV*3 |
0.18μV*3 |
10dB S/N for SSB, CW, RTTY and AM, 12db SINAD for FM
*1Preamp is ON
*2Preamp is ON
*3Preamp is ON
|
|
Squelch sensitivity
SSB, CW, RTTY
FM
|
(Pre-amp: OFF)
Less than 5.6μV
Less than 1μV |
|
Selectivity
SSB (BW: 2.4kHz)
CW (BW: 500Hz)
RTTY (BW: 350Hz)
AM (BW: 6kHz)
FM (BW: 15kHz)
|
(representative value)
More than 2.4kHz/–6dB
Less than 3.2kHz/–40dB
Less than 3.6kHz/–60dB
Less than 4.3kHz/–80dB
More than 500Hz/–6dB
Less than 700Hz/–60dB
More than 360Hz/–6dB
Less than 650Hz/–60dB
More than 6.0kHz/–6dB
Less than 15.0kHz/–60dB
More than 12.0kHz/–6dB
Less than 20.0kHz/–60dB |
|
Spurious and image
rejection ratio
|
More than 70dB (HF, 50MHz)
More than 60dB (144MHz)
(except IF through on 50MHz)
|
|
AF output power
(at 13.8V DC)
|
More than 2.0W at 10% distortion
with an 8Ω load
|
|
RIT variable range |
±9.99kHz |
|
PHONES connector |
3-conductor 6.35 (d) mm (1⁄8″)
|
|
EXT SP connector |
2-conductor 3.5 (d) mm (1⁄8″)/8Ω |