English | Español | Português
Icom America - 2 way radios


VHF FM Transceiver



Frequency range

Tx 144–148 MHz

Rx 136–174 MHz*
*Guaranteed range 144–148 MHz

Type of emissions F2D/F3E (FM)
No. of memory channels 207 (incl. 6 scan edges and 1 call)
Frequency stability ±2.5ppm (-20°C to +60°C) at 25° C
Operating temperature range –20°C to +60°C; –4°F to +140°F
Power supply requirement 7.2 V DC

Current drain (at 7.2V DC)

Tx 5.5W 1.4A
Rx Max. audio 310mA, Internal; 180mA, external
Standby 65mA
Power saved 20mA
Antenna impedance 50Ω (BNC)


(proj. not incl.)

58 × 112 × 30 mm; 2.28 × 4.41 × 1.18 in

Weight (approx.) 140g; 4.9oz (without battery pack)
360g; 12.7oz (with BP-264 and FA-B2E)
Output power (at 7.2 V DC) 5.5 W (High)
2.5 W (Mid)
0.5 W (Low)
Spurious emissions Less than –60 dB
Max. frequency deviation ±5.0 kHz/±2.5 kHz (wide/narrow)
External mic. connector 3-conductor 2.5 (d) mm (1/10″) / 2.2 kΩ
Sensitivity 0.14 µV (typ.; at 12dB SINAD)
Squelch sensitivity 0.1 µV (typ.; at threshold)
Selectivity 70dB/50dB typical (wide/narrow)
Intermodulation 70dB/65dB typical (wide/narrow)
Spurious and image rejection 75dB (typical)

Audio output power

(at 10% distortion)

Internal SP

External SP

750mW typ. (16Ω load)
450mW typ. (8Ω load)
External speaker connector 3-conductor 3.5 (d) mm (1/8″) / 8Ω

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL 810 F
Method Proc.
Low Pressure 500.4 I, II
High Temp. 501.4 I, II
Low Temp. 502.4 I, II
Temp. Shock 503.4 I
Solar Radiation 505.4 I
Rain Blowing/Drip 506.4 I, III
Humidity 507.4
Salt Fog 509.4
Dust Blowing 510.4 I
Vibration 514.5 I
Shock 516.5 I, IV

Also meets equivalent MIL-STD-810-C, -D and -E
Ingress Protection Standard: Dust and water – IP54 (dust-protection and water resistant)

All stated specifications are subject to change without notice or obligation.

View our blog